Yamaha TF-Rack Digital Mixing Console Kit with Dante I/O Expansion Card

Take your professional mixing and recording to new heights with this Fotohaus Klinger Kit which combines the Yamaha TF-Rack Digital Mixing Console with the NY64-D Dante I/O Expansion Card to create the ultimate portable mixing and recording setup with an expanded 128 channel count.

The Yamaha TF-Rack is a rack-mountable digital audio mixing console that features a touchscreen display, and is expandable up to 40 input channels by adding the optional Tio1608-D I/O rack. Ideal for a multitude of live sound reinforcement scenarios, the TF-Rack can also be used for live recording, offering 34x34 channel digital recording and playback via USB 2.0 using a computer and your preferred DAW software, and 2x2 channel recording and playback using any USB storage device.

The TF-Rack console itself provides 16 analog XLR/TRS combo mic/line inputs with 48V phantom power, as well as an analog RCA stereo line input, and 16 analog XLR outputs. Each combo input channel features a recallable D-PRE microphone preamp, as well EQ and two dynamics processors. In addition, the console offers eight powerful FX processors with patches ranging from reverb and delay, to modulation effects such as flanger and chorus, to utility processing like 3-band multi-band compression. The TF-Rack ships with Steinberg's Nuendo Live for advanced multi-tracking and virtual sound check capabilities.

The NY64-D from Yamaha is an I/O expansion card for the TF-series console that allows transmission and reception of up to 128 channels (64 in/64 out) of uncompressed 24-bit/48 kHz digital audio data via a Dante audio network. It is also compatible with the Tio1608-D Dante-equipped I/O rack (sold separately) and with this setup, it becomes possible to create a stage-box system with up to 48 inputs and 24 outputs.

Expansion Slots: 1 DSP 8 effects + 10 GEQ USB 34 x 34 USB audio interface, 2-track recording via USB storage device Sampling Frequency 48 kHz, internal Signal Delay Less than 2.6 ms, Input to Omni Out, Fs=48 kHz Total Harmonic Distortion Less than 0.05% 20 Hz - 20 kHz @ +4 dBu into 600 Ohms, Input to Omni Out, input gain = min. (measured with a -18 dB/octave filter @ 80 kHz) Frequency Response+0.5, -1.5 dB 20 Hz - 20 kHz, refer to +4 dBu output @ 1 kHz, Input to Omni Out Dynamic Range 110 dB typ., DA converter, 108 dB typ., Input to Omni Out, input gain = min Noise Equivalent Input Noise: -128 dBu typ., input gain = max. (measured with an A-weight filter)

Residual Output Noise: -85 dBu, ST master off (measured with an A-weight filter) Crosstalk-100 dB (measured with a -30 dB/octave filter @ 22 kHz), adjacent Input/Omni Out channels, input gain = min Power Requirements 100 - 240 VAC 50/60 Hz Power Consumption 85 W Analog Inputs Input Terminals: Input 1-16, ST In 1,2

Connector: RJ-45 (Network); TS Phone (Foot SW) Dimensions 18.9 x 5.2 x 16.1" / 48.0 x 13.2 x 40.9 cm Net Weight 20.3 lb / 9.2 kg