Vello FreeWave Fusion Basic 2.4 GHz Wireless Trigger System for Canon

The FreeWave Fusion Basic 2.4 GHz Wireless Trigger System for Canon from Vello is a versatile, reliable remote control kit that will trigger a camera, shoe mount flash, and studio lights from up to 328' away. Sixteen discrete channels provide the ability to avoid interference from other users while maximizing your creative potential.

Use the system to expand the capabilities of a shoe mount flash or studio lights without the hassle of tangled PC cords. The FreeWave system is also great for capturing wildlife. Simply place the camera on a tripod and use the FreeWave Fusion trigger as a remote camera release from a distance. The trigger allows camera's shutter remotely to avoid unwanted camera vibration for sharper macro imaging. The 2.4GHz radio signal will pass through walls, windows, floors, and other obstructions.

The FreeWave Fusion Basic 2.4 GHz Flash Trigger Set is compatible with most major manufacturers' shoe-mount flashes with manual power control. Pentax, and Sony Minolta-type shoes are not compatible. Each unit runs off two AAA batteries (not included).

The FreeWave Fusion Basic can wirelessly trigger hot shoe flashes, studio lights, or a camera from up to 328' away. It can also be used as a wireless "cable release" for wildlife or on a tripod for macro work.

This low frequency signal can pass through and around obstructions offering greater flexibility in placement of flash units and cameras.

Take advantage of sync speeds that match the synch speed rating of a camera up to 1/250 sec.

The wireless system's 16 channels allow transmitter/receiver settings to be changed to avoid interference from other wireless devices.

Multiple receivers to trigger many flashes may be used with a single transmitter. Multiple cameras may also be triggered with additional receivers and shutter release cables.

Confirm communication of trigger system with pre-focus, shutter release, and flash trigger in wireless mode.

Use the FreeWave Fusion Basic on a tripod with a camera's Bulb setting to make exposures as long as the camera will support without touching the camera.

Press halfway to focus, press fully to trigger the shutter.

Release the shutter from a safe distance for photos of hard to approach wildlife.

Use the transmitter as a wireless "cable release" to avoid accidental movement when shooting close-up.

Allows the cameras motor drive to be used for rapid sequences.

Most hot shoe flashes, studio strobes, and cameras are compatible with the FreeWave Fusion Basic 2.4 GHz.

Canon EOS 3-Pin: 1DX Mark III, 1DX Mark II, 1D X, 1D C, 1Ds Mark III, 1Ds Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5DS R, 5DS, 5D Mark IV, 5D Mark III, 5D Mark II, 5D, 6D Mark II, 6D, 50D, 40D, 30D, 20D, 10D 7D Mark II, 7D, R5

Canon EOS 2.5 mm: R6 II, R6, R, RP, R8, R10, R100, M6 II, M6, M5, 90D, 80D, 70D, 60D, 77D (9000D), T7i (800D),T8i (850D), T7 (2000D), T6s (760D), T6i (750D), T6 (1300D), T5i (700D), T5 (1200D), T4i (650D), T3i (600D), T3 (1100D), T2i (550D), T1i (500D), XSi (450D), XTi (400D), XT (350D), XS (1000D), Digital Rebel (300D), SL3 (250D), SL2 (200D), SL1 (100D), and Elan series

Canon PowerShot: G1 X Mark III, G1 X Mark II, G1 X, G5 X, G3 X, G16, G15, G12, G11, G10, SX70 HS, SX60 HS, and SX50HS

Contax: N and 645

FUJIFILM: GFX 100S, GFX-100, X-PRO3, X-H2, X-H2S, X-T5, X-T4, X-T3, X-T1, X-T30 II, X-T30, X-E4, X-E2, X-E1, X100V, X100T, X30, and X-S10

Hasselblad: H series

Olympus: OM-D E-M1X, OM-1, OM-D E-M1 Mark II, E-M5 III, and E-M5 II

OM System: OM-1, OM-5

Pentax: K10D, K20D, K100D, K110D, K200D, K-3, K-5, K-5 II, K-7, K30, K-50, K-500, *istDS, DS2, DS, DL2, DL, and D

Samsung: NX10 & NX100; GX-1S, GX-1L, GX-10, and GX-20

Sigma: SD1, SD9, SD10, SD14, and SD15

UPC: 847628591660