Radius RAD-2 Combo Set Shockmount with Boom Swivel and Pistol Grip Handle

Designed for boompole and handheld recording outdoor, the Radius RAD-2 Combo Set includes a RAD-2 microphone shockmount with a boompole swivel adapter, 360° rotatable XLR holder, and three pairs of interchangeable RAD-2 hoops with different levels of firmness. A handle grip with 3/8" thread and a low-profile 3-pin XLR jumper cable (11") are also included.

RAD-2 Microphone Shockmount

The Radius RAD-2 is a microphone shockmount suitable primarily for outdoor booming or indoor, when using the mic by itself or with a slip-on fur windshield on it. Designed to hold standard-length shotgun and small-diaphragm pencil microphones (19-25mm in diameter, up to 250mm in length), this suspension provides exceptional isolation from movement, handling noise, and other vibrations associated with booming. The RAD-2 features two soft-coated universal mic clips (dark gray). To achieve the best isolation for your style of booming, three pairs of interchangeable RAD-2 hoops are included: standard firmness (black), soft firmness (dark gray), and extra-firm (dark blue). The RAD-2 hoops are slightly thicker than RAD-1 hoops and have an extra 3mm of bracing on top to hold the extra weight of front-heavy microphones.

The base of the shockmount comes with a 360° rotatable XLR holder to further isolate the mic from cable noise. There is a 3/8"-16 thread at the bottom to mount the RAD-2 on boompoles, stands, or with quick-connect attachments.

Compatible Microphones

• Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600
• Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT
• Sanken CS-3
• Rode NTG-3
• DPA 2017, DPA 4017
• Other standard-length shotgun microphones
• Small condenser pencil microphones 19-25mm in diameter

Handle Grip with 3/8" Thread

The RAD Handle Grip is designed to attach to the RAD-2. It has a 3/8" threaded bottom, so it can fit on boom poles, stands, or used with a quick-connect attachment. The handle has a rubber coated embedded XLR holder with a rubber safety strap to keep the XLR socket securely fitted inside.

Quiet, Rugged, and Versatile RAD Shockmounts

All of the components of the RAD-1, RAD-2, and RAD-3 shockmounts are produced using virtually indestructible thermoplastic elastomers from high-precision injection molding in an ISO-9000 certified factory (no 3D printing ). Each of the parts for all versions of the mounts are interchangeable for use. Spare parts are also available to add individual components to your mount as needed.

The RAD shockmounts are made in England.

EAN: 5061009201619