Polymaker 1.75mm PolyMax PC Filament (3kg, Black)

The Polymaker 1.75mm PolyMax PC Filament provides optimal strength, toughness, heat resistance, and 3D printing quality. It prints better than other choices of PC while still having a relatively low printing temperature. With a softening point of 235.4°F / 113°C, it can operate in demanding environments where impact resistance, heat resistance, and vibrations happen.

Printing Settings

• Printing Temperature: 482 - 518°F / 250 - 270°C
• Bed Temperature: 194 - 221°F / 90 - 105°C
• Printing Speed: 30 - 50 mm/s
• Fan: OFF

Direct Drive

• Retraction Distance: 1 mm
• Retraction Speed: 20 mm/s

Indirect Drive

• Retraction Distance: 3 mm
• Retraction Speed: 40 mm/s

Drying Settings

• 167°F / 75°C for 12 hours (Only if the material has absorbed moisture)

Annealing Settings

194°F / 90°C for 2 hours

EAN: 6938936712770