Istorage 26TB diskAshur DT2 USB 3.2 Gen 1 Encrypted External Hard Drive (FIPS Level 3)

Secure your critical data with the 26TB diskAshur DT2 Encrypted External Hard Drive from iStorage. Inside the durable exterior is a processor delivers full disk AES-XTS 256-bit hardware encryption with a key protected by FIPS 140-2 Level 3 certified and Common Criteria validated wrapping algorithms. Meanwhile, the 26TB hard drive delivers up to 286 MB/s read and 278 MB/s write speeds.

The wear-resistant keypad supports 7 to 15-digit user and admin independent PINs and features a polymer coating that both protects the keys while hiding their usage. Designed to be OS and host independent, the diskAshur DT2 works with most devices with a USB-A 3.2 Gen 1 port.

Internal components are covered with a layer of epoxy resin, which is virtually impossible to remove without causing significant damage.

Ideal for corporate and government deployment, if a user forgets their PIN, the drive can be unlocked using the admin PIN. Then the administrator can allow the user to set a new PIN.

Both the admin and user can configure the diskAshur DT2 as a read only (write protect) drive. If configured by the admin, the drive cannot be modified or disabled by the user.

The drive will freeze, requiring the drive to be disconnected and reconnected to the USB port to get a further five PIN entry attempts.

If the following five (10 in total) consecutive PIN attempts are entered incorrectly again, the diskAshur DT2 will freeze again. To get a further and final five PIN attempts (15 in total), the shift button must be pressed while inserting the USB cable to the USB port and then an iStorage preset PIN will need to be entered.

On the 15th consecutive incorrect PIN entry, the diskAshur DT2 assumes it is being attacked and will delete the encryption key and lock itself, rendering all data previously stored on the drive as lost forever. At this point the drive can be reset to factory default settings and redeployed.

Automatically locks when unplugged from the host computer or when power to the USB port is turned off. The drive can also be set to automatically lock after a predetermined amount of time.

Pre-program the diskAshur DT2 with a self-destruct PIN. Once entered, the data, encryption key, and all PINs are deleted and rendered as lost forever.

Deletes the encryption key and PINs, rendering all data as lost forever. The drive can then be redeployed, which randomly generates a new encryption key. This process may be repeated as many times as required.

The drive is configured with a unique VID/PID and internal/external serial number with barcode, allowing it to be easily integrated into standard end-point management software (white-listing), to meet internal corporate requirements.