GLOBAL DYNAMICS UNITED 120mm Touch N Go QR System

The Global Dynamics United 120mm Touch N Go QR System is well suited for use with large cinema and digital cinema cameras. It consists of a spring-loaded QR plate receiver and the QR plate. The receiver features a spring-loaded latching system to hold the plate securely and a safety catch to help prevent accidentally unlocking the plate. 29 x 3/8"-16 and 22 x 1/4"-20 threaded mounting holes on the bottom of the receiver provide a variety of mounting options.

The QR Plate features rubber pads on the top of the plate and includes two captive 3/8"-16 tie-down screws. One screw slides within an almost 2" long slot, allowing you to adjust the position of your camera on the plate. Four additional 3/8"-16 threaded screw holes are distributed around the plate, with an M4 threaded screw hole at the front. The anodized machined aluminum plate is wear and corrosion resistant, and it has grooves cut into the underside to reduce weight.

The QR receiver features a spring-loaded latching system with a safety catch to help prevent the plate from accidentally being released.

The plate has grooves machined into the bottom of the plate. These grooves reduce the overall weight of the plate, while increasing its resistance to flexing.

The screw slot for the 3/8"-16 screws is 1.625" long and provides a maximum on-center distance of 1.5" between the two screws.