FoxFury Taker B50 Ballistic Cree-LED Shield Light

Designed for use by SWAT, special operations, and other tactical response personnel, the Taker B50 Ballistic Shield Light from FoxFury installs on most shields with no tools and provides 1000 lumens of white light in momentary, continuous-on, and strobe modes. This light is powered by either three or six CR123 batteries; using three decreases runtime but not output. Runtime with six cells is five hours for momentary or continuous-on, and eight hours for strobe. A separate kill switch prevents accidental activation.

The light works in two settings: On/Off and Tactical. It ships in Tactical, which gives the operator access to momentary-on, continuous-on and strobe modes. To switch from Tactical to On/Off, click the switch twice and hold the second click for 10 seconds. To switch the other way, click once and hold it for 10 seconds. The battery pack is connected to the switch and to the LED head on the front of the shield by braided steel cables with nylon connectors. The B50's anodized aluminum housing and replaceable polycarbonate lens cover are designed to withstand harsh conditions. It is submersible to 19.7', impact resistant to 9.8', and meets NFPA fire-resistance standards.

Light Performance

• 1000-lumen white Cree LED
• Momentary-on, continuous-on, & strobe modes
• Runs on three or six CR123 batteries
• Runtime with six batteries is five hours momentary & continuous, eight hours flash

Switching

• Remote pressure switch cable-connected to battery pack
• Switch placement at user's discretion
• Press & hold for momentary, click twice for strobe, click three times for continuous-on
• Separate kill switch prevents accidental activation

Construction Details

• Attaches to most shields with 3M industrial hook & loop fastener
• Braided steel cables from battery pack to light head & remote switch
• Submersible to 19.7', impact resistant to 9.8', NFPA fire resistant
• Aluminum housing, replaceable polycarbonate lens