DPA Microphones Core 4071 ENG/EFP Omni Microphone Kit (Loud SPL, Black)

The loud SPL, black Core 4071 ENG/EFP Omni Microphone Kit from DPA includes a Core 4071 omnidirectional lavalier microphones hardwired to a microDot connector, an XLR adapter with belt clip, a single mic holder, a double mic holder, a 7-pack of mixed-color windscreens, a mesh windscreen, a fur windscreen, and a travel case. The Core 4071 miniature microphone amplifier delivers both an increase in dynamic range and a reduction in THD (total harmonic distortion) over the 4071 Legacy model. This kit can be used to capture audio for ENG and EFP applications, as well as any scenario that requires small, moisture-resistant microphones. It has a built-in low-cut filter at 100 Hz for reduced low-frequency resonances and rumbling. Its high-frequency boost is tailored for speech intelligibility.

The DPADAD6001 is an adapter featuring XLR and Microdot connections allowing you to attach a miniature DPA microphone to a preamp, mixer, camera, or similar device able to supply phantom power.

The adapter is functional at 12V, but requires 48V for the connected mic to reach full specifications. The active-signal balanced wiring allows for longer cable runs with less noise—with a common mode rejection ratio (CMRR) that is better than 60 dB in the 50 Hz to 15 kHz range.

This version features a belt clip for added convenience in mobile situations. The belt clip can be removed for direct camera connections if desired.

The black SCM0018 from DPA is a double mic holder for d:screet miniature microphones (sold separately). It can be used for mounting dual microphones to clothing to create a distance from the capsule and minimize clothing and fabric noise. Furthermore, it is prepared for both left and right mounting, for applications such as live stage, broadcast TV, houses of worship, and more.

The SCM0018 is used with omnidirectional microphones that pick up sound no matter which direction the microphone is placed in. The rear cable hook controls cable run behind clothes and improves minimum visual appearance.

The black DPA Microphones SCM0017 is a curved clip designed to securely attach a 4060 Series miniature lavalier microphone onto clothing. The curved design creates distance between the capsule and the clothing, minimizing rustling noise created by fabric contact in applications such as live stage, broadcast TV, houses of worship, and more.

Due to its flexibility, the SCM0017 can be used for both left- and right-side mounting. The rear cable hook allows you to run the mic cable behind clothes, minimizing the lavalier's visual appearance.